Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Crankshaft, Engine
Crankshaft and FlywheelMain Bearing Journal
- Diameter 1,2, 3 63.983-64.003 mm (2.5190-2.5198 inch)
- Out-of-Round Limit
0.008 mm (0.0003 inch) MAX in 45 degrees,
0.015 mm (0.006 inch) TOTAL
- Taper Limit 0.008 mm (0.0003 inch) per 25 mm (1 inch)
- Journal Runout Limit
0.05 mm (0.002 inch) (2)0.05 mm (0.002 inch) (3)
- Surface Finish (RMS) 0.3 micrometers (11.8 micro inch)
Thrust Bearing Journal
- Length 29.725-29.775 mm (1.703-1.722 inch)
Connecting Rod Journal
- Diameter 58.682-58.702 mm (2.3103-2.3111 inch)
- Out-of-Round Limit
0.008 mm (0.0003 inch) MAX in 45 degrees,
0.015 mm (0.0006 inch) TOTAL
- Taper Limit 0.008 mm per 25 mm (0.0003 in per inch)
- Surface Limit (RMS) 0.3 micrometers (11.8 micro inch)
Main Bearing Thrust Face
- Surface Finish (RMS)
0.9 micrometers (0.354 micro inch) FRONT
0.6 micrometers (0.236 micro inch) REAR
- Runout Limit 0.025 mm (0.001 inch)
Flywheel Ring Gear Lateral Runout(T.I.R)
- Automatic Transmission 1.778 mm (0.07 inch)
Crankshaft End Play 0.10-0.20 mm (0.004-0.008 inch)