Steering: Specifications
| Steering wheel turning effort | 5.0 lbs | |
| Steering wheel free play | 0.12 inch | |
| Power steering gear | Type | Rack and pinion |
| Steering gear turns | 2.38 | |
| Tie-rod articulation torque after breakaway | 2-10 lbs. | |
| Power steering pump | Type | CII |
| Flow rate @ 74 deg - 80 deg C (165 deg - 175 deg F) and engine set at 1500 RPM | 2.6 gpm | |
| Maximum pressure @ 74 deg - 80 deg C (165 deg - 175 deg F) and engine set at 1500 RPM | 150 psi | |
| Minimum flow rate @ 74 deg - 80 deg C (165 deg - 175 deg F) and engine set at idle | 0.9 gpm | |
| Relief pressure | 1050-1230 psi | |
| Type | CIII | |
| Flow rate @ 74 deg - 80 deg C (165 deg - 175 deg F) and engine set at 1500 RPM | 2.6 gpm | |
| Maximum pressure @ 74 deg - 80 deg C (165 deg - 175 deg F) and engine set at 1500 RPM | 150 psi | |
| Minimum flow rate @ 74 deg - 80 deg C (165 deg - 175 deg F), 5102 kPa (750 psi) and engine set at idle | 1.25 gpm | |
| Relief pressure | 1200-1380 psi | |
| Lubricants | MERCON | |
| Power steering fluid capacity including steering pump | 2.5 pints | |
| Steering gear | gear ratio on center | 17:1 |
| Lubricant capacity | 1-1.3 oz | |
| Number of turns | 2.86 | |
| Effort required to sustain correct input shaft rotation Power cylinder drained and gear removed from vehicle | 12 inch lbs. | |
| Front wheel spindle tie-rod | 74 ft. lbs. | |
| Power steering pump mounting bolts | CII pump | 38 ft. lbs. |
| CIII pump | 18 ft. lbs. | |
| Pressure line fitting | CII | 30 ft. lbs. |
| CIII | 48 ft. lbs. | |
| Pressure line fitting | 22 ft. lbs. | |
| Return line fitting | steering gear | 22 ft. lbs. |
| Steering gear mounting nut | 35 ft. lbs. | |
| Steering intermediate shaft coupling pinch bolt | 25 ft. lbs. | |
| Tie-rod end castellated nut | 11 ft. lbs. Once torque is reached, continue turning to align slot in nut with cotter pin hole in tie-rod. |