Keyless Entry Module: Service and Repair

MODULE - REMOTE KEYLESS ENTRY

REMOVAL

1. CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

Disconnect the battery ground cable.







2. Remove the body side trim finish panel.
1 Remove the three finish panel pushpins.
2 Remove the finish panel from the body side.







3. Remove the remote keyless entry module.
1 Disconnect the electrical connectors.
2 Remove the two nuts.
3 Remove the module.

INSTALLATION

1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.
- If installing a new module it is necessary to reprogram Remote Keyless Entry Transmitters; refer to Keyless Entry.