Crankshaft, Engine

Maximum Out-of-Round 0.0075 mm Between Cross Sections
Maximum Taper (Straightness) 0.004 mm
Runout: FIM of center journals when located on front and rear journal;0.05 mm 3 Places
Clearance - Crankshaft 0.048-0.024 mm
Connecting Rod Journal Diameter 53.003-52.983 mm
Maximum Out-of-Round 0.0075 turn Between Cross Sections
Maximum Taper 0.004 mm
Crankshaft End Play 0.075-0.377





Vertical main bearing cap bolts.
Stage 1 40 Nm (30 ft. lbs.)
Stage 2 90°





Horizontal main bearing bolts.
Stage 1 30 Nm (22 ft. lbs.)
Stage 2 90°