Transfer Case Rear Output Shaft Flange

Transfer Case Rear Output Shaft Flange





Special Tool(s)

Removal
1. Remove the transfer case.





2. CAUTION: Rotational torque of the companion flange must be measured and recorded for correct pinion bearing preload when reassembled.

Using the special tool, remove the pinion nut.





3. CAUTION: Mark the companion flange relative to the pinion spline.

Using the special tool, remove the companion flange.

Installation





1. CAUTION: Install the companion flange to engage the spline as previously marked.

Using the special tool, install the companion flange.

2. CAUTION: Do not over tighten the pinion nut. Refer to the rotational torque previously recorded.

Install the pinion nut.
3. Install the transfer case.