Valve Cover LH
Valve Cover LHRemoval and Installation
1. Remove the air cleaner assembly.
2. Disconnect and cap, the engine vent hose and the radiator vent hose.
3. Remove the bolts and position the degas bottle aside.
4. Remove the turbocharger inlet pipe mounting nuts and disconnect the vent tube.
5. Loosen the clamp and remove the turbocharger inlet pipe.
6. Remove the fuel injection control module mounting bolts and position the module for access to the electrical connectors.
7. Disconnect the fuel injection control module electrical connectors. Remove the fuel injection control module.
8. Remove the fuel injection control module mounting bracket.
9. Disconnect the glow plug connector and position aside.
10. Remove the nut and position the oil level indicator and tube aside.
11. NOTE: Mark the position of the valve cover bolts for valve cover bolt installation.
Remove the eleven bolts and the valve cover. Clean and inspect the valve cover gasket, and install a new gasket if necessary.
12. To install, reverse the removal procedure.