Front Bench Seat Safety Belt

Torx Bit Tool Set Used For T55 "Torx Plus" Bit:

SPECIAL TOOL(S)

REMOVAL
1. Remove the utility tray, if necessary.







2. Disconnect and detach the driver safety belt switch.







3. Remove the safety belt bolts.
1 Use the T-55 Torx bit to remove the safety belt buckle bolt.
2 Use the T-55 Torx bit to remove the safety belt tongue bolt.







4. Remove the safety belt.
1 Remove the safety belt buckle.
2 Remove the safety belt tongue.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE:
^ Make sure the safety belt webbing is not twisted prior to installation.
^ Make sure to tighten bolts to specification.

2. Check the restraint system for correct operation.