Harmonic Balancer - Crankshaft Pulley

Vibration damper mounting area runout (max) 0.05 mm (0.002 inch)
Crankshaft pulley bolts (dual alternators) 47 Nm (35 ft. lbs.)





NOTE: New bolts must always be used.

Crankshaft vibration damper
Install the crankshaft vibration damper and bolts.
^ Tighten the bolts in the sequence shown.
^ Tighten the bolts to 68 Nm (50 ft. lbs.).
^ Tighten the bolts an additional 90 degrees.