Customer Safety Information
WARNING:^ ALL SAFETY BELT ASSEMBLIES INCLUDING RETRACTORS, BUCKLES, FRONT SEAT BELT BUCKLE SUPPORT ASSEMBLIES (SLIDE BAR), IF EQUIPPED, SHOULDER BELT HEIGHT ADJUSTERS, IF EQUIPPED, CHILD SAFETY SEAT TETHER BRACKET ASSEMBLIES, IF EQUIPPED, AND ATTACHING HARDWARE SHOULD BE INSPECTED AFTER ANY COLLISION. ALL BELT ASSEMBLIES SHOULD BE INSTALLED NEW UNLESS A QUALIFIED TECHNICIAN FINDS THE ASSEMBLIES SHOW NO DAMAGE AND OPERATE CORRECTLY. BELT ASSEMBLIES NOT IN USE DURING A COLLISION SHOULD ALSO BE INSPECTED. NEW SAFETY BELT ASSEMBLIES SHOULD BE INSTALLED IF EITHER DAMAGE OR INCORRECT OPERATION IS NOTED.
^ EACH SEATING POSITION IN THE VEHICLE HAS A SPECIFIC SAFETY BELT ASSEMBLY WHICH CONSISTS OF ONE BUCKLE AND ONE TONGUE. THE SAFETY BELT ASSEMBLY IS DESIGNED TO BE USED AS A PAIR AND IS NOT TO BE USED ACROSS SEATING POSITIONS.
^ REAR FACING CHILD SEATS OR INFANT CARRIERS SHOULD NEVER BE PLACED IN THE FRONT SEATS. IF YOU MUST USE A FORWARD FACING CHILD SEAT, MOVE THE SEAT ALL THE WAY BACK.
^ WHENEVER THE YELLOW PORTION OF THE LABEL IS VISIBLE, THE SAFETY BELT MUST BE REPLACED.
^ FAILURE TO FOLLOW THESE INSTRUCTIONS WILL AFFECT THE PERFORMANCE OF THE SAFETY BELTS AND INCREASE THE RISK OF PERSONAL INJURY.
^ AFTER ANY VEHICLE COLLISION, THE SAFETY BELT SYSTEM AT ALL OUTBOARD SEATING POSITIONS (EXCEPT DRIVER, WHICH HAS NO "AUTOMATIC LOCKING RETRACTOR" FEATURE) MUST BE CHECKED BY A QUALIFIED TECHNICIAN TO VERIFY THAT THE "AUTOMATIC LOCKING RETRACTOR" FEATURE FOR CHILD SEATS IS STILL FUNCTIONING PROPERLY, IN ADDITION TO OTHER CHECKS FOR PROPER SAFETY BELT SYSTEM FUNCTION. A BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED IF THE SAFETY BELT ASSEMBLY'S "AUTOMATIC LOCKING RETRACTOR" FEATURE OR ANY OTHER SAFETY BELT FUNCTION IS NOT OPERATING PROPERLY WHEN CHECKED ACCORDING TO THE PROCEDURES. FAILURE TO REPLACE THE BELT AND RETRACTOR ASSEMBLY COULD INCREASE THE RISK OF INJURY IN COLLISIONS.