Body Support - Middle, Crew Cab, Lower
BODY SUPPORT-MIDDLE, CREW CAB, LOWERRemoval
1. Move the front seat forward.
2. Remove the rear door cowl side trim panel (02345).
3. Pull the carpet or mat back to expose the middle body insulator button plug.
4. Remove the plug.
5. Remove and discard the bolt.
6. Remove the insulator.
Installation
NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
1. NOTE: No lubricants of any kind are to be used during body insulator installation.
Follow the removal procedure in reverse order.