Auxiliary Climate Control

REMOVAL
1. Remove the air conditioning and heater assembly.

NOTE: Before the removal of the A/C evaporator core, an in-vehicle pressure test must be carried out.







2. Remove the A/C evaporator core.







3. Remove the A/C evaporator expansion valve.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE:
^ Make sure to correctly assemble and seal the air conditioning and heater assembly to allow efficient operation of the auxiliary climate control system.
^ Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.