Injection Pressure Regulator Valve

Injection Pressure Regulator Valve

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. Vehicle Lifting




2. Remove the fluid level indicator.





3. Remove the transmission fluid fill tube nut.





4. Position aside the transmission fluid filler tube.





5. Remove the turbocharger heat shield.





6. Disconnect the injector control pressure (ICP) and the injector pressure regulator (IPR) valve sensor electrical connectors.





7. NOTE: Engine removed for clarity. Using a 12-point crows foot flare tool, remove the IPR valve.

8. To install, reverse the removal procedure.