Front Captain's Chair

REMOVAL

All vehicles
1. Position the front seat to its highest and rear most position.







2. Remove the safety belt buckle.
1 Remove the nut.
2 Remove the safety belt buckle.

NOTE:
^ The driver side is shown, the passenger side is similar.
^ The passenger side safety belt buckle is not equipped with a safety belt warning indicator switch wire harness and electrical connector.

Driver seat Only







3. Disconnect the safety belt buckle warning indicator switch electrical connector and separate it from the mounting bracket.







4. Pull the wire harness and electrical connector through the seat.

INSTALLATION

All vehicles
1. To install, reverse the removal procedure.

NOTE: Make sure to tighten all nuts and bolts to specification.

2. Check the active restraint system for correct operation.