Compressor Fitting HVAC: Service and Repair

COMPRESSOR MANIFOLD AND TUBE ASSEMBLY

REMOVAL

NOTE:
- Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of contamination from a failed A/C compressor or damage to the suction accumulator.
- New O-ring seals, lubricated in clean PAG oil, must be installed before reconnecting any A/C fitting which has been disconnected.

1. Remove the A/C compressor.







2. Remove the components in the order indicated in the illustration and table.

Item 5: Compressor Manifold and Tube Assembly Removal Note







1. Remove the lower compressor manifold and tube bracket nuts.

INSTALLATION
1. To install, reverse the removal procedure.