Accelerator Cable and Bracket

ACCELERATOR CABLE AND BRACKET - 4.6L (2V)

REMOVAL







1. Remove the components in the order indicated in the illustration and table.

Item 2: Accelerator Cable Removal Note







1. Remove the accelerator cable from the rubber plunger.







2. Position the rubber plunger rearward and remove the cable from the accelerator pedal.







3. Rotate the throttle cam and disconnect the accelerator cable.







4. Squeeze the tabs and remove the accelerator cable from the bracket.







5. Disconnect the accelerator cable routing clips in two locations.







6. Pull the accelerator cable boot to the unlock position and remove the accelerator cable.

INSTALLATION
1. To install, reverse the removal procedure.