Cowl Moulding / Trim: Service and Repair

Cowl Panel Grille

Removal and Installation
1. Disconnect the driver side windshield washer hose from inside the engine compartment.







2. Remove the windshield wiper pivot arms.
1 Slide the clip so the windshield wiper pivot arm will clear the windshield wiper pivot shaft.
2 Pull the windshield wiper pivot arm from the windshield wiper pivot shaft.







3. Remove the cowl grille screw.







4. Remove the driver side cowl grille.
- Pull up on the cowl grille to disengage the clips.







5 Remove the passenger side cowl grille.
- Pull up on the cowl grille to disengage the clips and disconnect the washer hose

6. To install. reverse the removal procedure.