Rear Quarter Trim Panel

REAR QUARTER TRIM PANEL

REMOVAL







1. If equipped, remove the retractable cargo cover.
2. Fold the rear seats down.
3. Remove the front door scuff plate.







4. Remove the side flip-out window latch screws.







5. Remove the rear quarter trim panel handle screw cover.







6. Remove the liftgate scuff plate.







7. Remove the upper rear trim panel.







8. Remove the D-pillar trim panel.







9. If equipped on the RH side, remove the rear door lock control switch assembly.
- Disconnect the electrical connector.







10. Remove the screws and the rear quarter trim panel.
- If removing the LH side disconnect the power point electrical connector.

INSTALLATION
1. To install, reverse the removal procedure.