Movable Quarter

REAR QUARTER WINDOW GLASS - MOVABLE QUARTER

REMOVAL
1. Remove the B-pillar trim panel.







2. CAUTION: To prevent damage to the coat hook retainer, use a 3/16-inch flat-blade screwdriver for this step.

Remove the coat hook over the window being removed.
- Open the access cover.
- Insert a screwdriver into the coat hook slot and turn the screwdriver 90 degrees so that it engages in the plastic component slot. This will spread the steel attachment clip wings to allow the plastic component to disengage. The steel clip will stay engaged in the sheet metal.







3. NOTE: Lower the headliner in the area of the nuts.

Remove the removable rear quarter window glass nuts.







4. Remove the removable rear quarter window glass.

INSTALLATION
1. To install, reverse the removal procedure.
- If the seal requires adjustment, disconnect the quarter window latch from the quarter trim panel. Rotate the quarter window latch clockwise to increase seal pressure or counterclockwise to reduce seal pressure.