Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2003 >> Explorer Sport Trac 2WD V6-4.0L VIN E >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Service and Repair

REMOVAL







1. Remove the bolts and the accelerator cable snow shield.







2. Separate the speed control cable from the intake manifold.
1 Disconnect the cable from the throttle linkage.
2 Depress the locking tabs and separate the speed control cable from the intake manifold.






3. Depress the locking tab and rotate the speed control cable cap to remove.







4. Disconnect the speed control cable from the speed control servo pulley and remove the speed control cable.
1 Gently push the retaining spring.
2 Disconnect the speed control cable slug from the speed control servo pulley.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: Make sure the rubber seal is fully seated onto the speed control cable cap
pro multis · About Operation CHARM