Camshaft, Engine

Camshaft
Theoretical valve lift @ 0 lash-intake 11.30 mm (0.45 inch)
Theoretical valve lift @ 0 lash-exhaust 11.47 mm (0.45 inch)
Lobe lift-intake 6.22 mm (0.24 inch)
Lobe lift-exhaust 6.57 mm (0.26 inch)
Allowable lobe lift loss 0.127 mm (0.005 inch)
Journal diameter 52.082-52.108 mm (2.0505-2.0515 inch)
Camshaft journal bore inside diameter-intake 47.097 mm (1.8542 inch) max. 47.072 mm (1.8532 inch) min.
Camshaft journal bore inside diameter-exhaust 39.739 mm (1.5645 inch) max. 39.714 mm (1.5635 inch) min.
Camshaft journal-to-bearing clearance 0.025-0.076 mm (0.001-0.003 inch)
Runout 0.05 mm (0.002 inch) runout of No. 2 or No. 3 relative to No. 1 and No. 4
End play 0.025-0.150 mm (0.001-0.006 inch)
Camshaft position sensor bolts 3 Nm (27 inch lbs.)
Camshaft synchronizer-to -front cover bolt 25 Nm (18 ft. lbs.)
Camshaft thrust plate-to-cylinder block bolts 12 Nm (9 ft. lbs.)
Camshaft synchronizer drive gear-to-camshaft bolt 45 Nm (33 ft. lbs.)
Camshaft thrust plate 12 Nm (9 ft. lbs.)