Rear Retractor, SuperCab

SPECIAL TOOL(S)

REMOVAL
1. Remove the upper rear corner trim panel.
2. Remove the lower corner trim panel.







3. Remove the rear safety belt retractor.
1 Use the special tool to remove the bolt.
2 Remove the rear safety belt retractor.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE:
^ Make sure that safety belt webbing is not twisted prior to installation. The SuperCab rear retractor anchor should be positioned with the vertical leg facing outboard.
^ Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.

2. Check the restraint system for correct operation.