After on-Board Diagnostics

After On-Board Diagnostics

NOTE: The vehicle wiring harness, powertrain control module and non-transaxle sensors may affect transaxle operations. Repair these concerns first.

After the on-board diagnostic procedures are completed, repair all DTCs.

Begin with non-transaxle related DTCs. then repeat any transaxle related DTCs. Refer to Diagnostic Troubles Code Charts for information on condition and symptoms. This chart will be helpful in diagnosing internal transaxle concerns and external non-transaxle inputs. The pinpoint tests are used in diagnosing transaxle electrical concerns. Make sure that the vehicle wiring harness and the PCM are diagnosed as well.