Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2003 >> Mustang V8-4.6L SOHC VIN X >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair >> Mass Air Flow (MAF) Sensor - Cobra
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Mass Air Flow (MAF) Sensor - Cobra

REMOVAL







1. Disconnect the Intake Air Temperature (IAT) sensor.







2. Disconnect the breather hose.







3. Disconnect the vacuum hose.







4. Loosen the clamps and remove the air cleaner outlet pipe.







5. Remove the mass air flow sensor.
^ Disconnect the MAF sensor electrical connector.
^ Remove the bolts and the MAF sensor.

CAUTION: The mass air flow (MAF) sensor hot wire sensing element and housing are calibrated as a unit and must be repaired as a complete assembly. Do not damage the sensing element (internal to housing) or possible failure to the mass air flow sensor can occur.

INSTALLATION
1. To install, reverse the removal procedure.
pro multis · About Operation CHARM