Electronic Brake Control Module: Service and Repair

Anti-Lock Brake System (ABS) Module

Removal
1. Disconnect the battery ground cable.





2. Remove the hydraulic control unit bolts.





3. Disconnect the electrical connectors.





4. Remove the anti-lock brake control module.
1 Remove the bolts.
2 Remove the anti-lock brake control module.

Installation








1. CAUTION: Once the new module is installed, it is necessary to configure it using the scan tool.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.