Rear Axle Differential Case
Rear Axle Differential CaseDisassembly and Assembly
1. Remove the differential case from the differential housing.
2. Remove the components in the order inculcated in the illustration and table.
Part 2 Of 2:
3. To assemble, reverse the disassembly procedure.
Item 1: Differential Pinion Shaft Roll Pin Disassembly Note
1. Use a drift punch to drive the roll pin into the differential pinion shaft until the roll pin bottoms against the differential case. When the differential pinion shaft is removed from the differential case, drive the roll pin from the shaft.
Item 1: Differential Pinion Shaft Roll Pin Assembly Note
1. Align the differential pinion shaft hole with the hole in the differential case. Using a hammer, install the differential shaft roll pin in the differential case until the pin is flush with the case.