Power Mirror Motor: Service and Repair

EXTERIOR MIRROR MOTOR

REMOVAL
1. Push in the upper edge of the mirror glass to its maximum travel and pull outward until the mirror glass is released.
- If equipped, disconnect the electrical connectors.







2. Remove the screws and the exterior rear view mirror motor.
- Disconnect the electrical connector.

INSTALLATION

1. NOTE:
- Apply Electrical Grease F8AZ-196208-AA meeting Ford specification WSB-M1C239-A to motor connector housing.
- Position the glass assembly in the mirror and push on the center of the mirror glass until it is fully seated.

To install, reverse the removal procedure.