Driven Sprocket Support

Driven Sprocket Support





Special Tool(s)

Disassembly





1. Remove the Teflon seal rings and the No. thrust washer.





2. NOTE: If the driven sprocket bearing is damaged it should be replaced.

Using the special tools, remove the driven sprocket bearing.

Assembly





1. If removed, install a new driven sprocket bearing. Using the special tools and an arbor press install a new driven sprocket bearing.





2. Make sure that the seals are mated correctly during installation.





3. CAUTION: The seal rings must be installed correctly. Transmission failure could result.

Install new Teflon seals and the No. 5 thrust washer.