Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2003 >> Windstar V6-3.8L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Disassembly and Assembly of Subassemblies >> Sun and Shell Assembly-Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sun and Shell Assembly-Assembly

Sun and Shell Assembly-Assembly





Special Tool(s)








Assembly





1. Install the direct one-way clutch assembly
1 Install the No.7 thrust washer.
2 Install the direct one-way clutch assembly.





2. NOTE: Lightly coat the O-rings with petroleum jelly.

Install new O-rings.





3. Install the forward clutch assembly.





4. NOTE: The spring retainer assembly contains both oval and circular holes. Make sure that the washer tabs lock into the oval holes.

Install the No. 6 rear clutch sun gear thrust washer.





5. Install the overdrive drum.





6. NOTE: The lip on the bearing goes over the hub.

Using petroleum jelly to hold the parts in place, install the No. 10 thrust bearing.





7. Install the rear clutch hub and the No. 10 thrust bearing.





8. NOTE: The lip on the bearing goes down over the hub.

Install the No. 11 thrust bearing.





9. Install the front sun shell.
pro multis · About Operation CHARM