Instrument Cluster (IC)

INSTRUMENT CLUSTER

REMOVAL

CAUTION:
- Prior to removal of the module, it is necessary to upload module configuration information to the diagnostic tool. this information needs to be downloaded into the new module once installed.
- Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.







1. Remove the headlamp switch knob.
1 Remove the headlamp switch knob.
2 Rotate the headlamp switch bezel counterclockwise and remove.







2. Remove the instrument panel finish panel.
1 Remove the bolts.
2 Remove the instrument panel finish panel.
- Disconnect the electrical connectors.







3. Remove the instrument cluster.
1 Remove the bolts.
- Remove the transmission range indicator and disconnect the electrical connectors.

2 Remove the instrument cluster.

INSTALLATION
1. To install, reverse the removal procedure.