Extended Range

HIGH-PRESSURE FUEL LINES - EXTENDED RANGE

REMOVAL
1. Remove the extended range fuel tank.







2. Remove the 14 bolts and the vapor retaining cover.







3. Remove the vent and fuel tubes.
1 Disconnect the electrical connector.
2 Loosen the fitting and remove the fuel tube.
3 Loosen the fitting and remove the vent tube.

INSTALLATION

1. NOTE:
- Replace the fuel tube O-ring seal.
- Lubricate the O-rings with clean engine oil prior to installation.
- When tightening the fuel tube, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the effective torque of the torque wrench being used. To correct the effective torque, a torque multiplication conversion must be used.

To install, follow the removal procedure in reverse order.
- Carry out the Fuel System Leak Test procedure. Testing and Inspection