Extension

HIGH-PRESSURE FUEL LINES - EXTENSION

REMOVAL
1. Carry out the Pressure Relief - Fuel Tube Venting Procedure.







2. Disconnect the extension high-pressure fuel tube from the rear high-pressure fuel tube.







3. Disconnect the high-pressure fuel tube from the extension high-pressure fuel tube.
4. Free the extension high-pressure fuel tube from the retaining clips.
5. Remove the extension high-pressure fuel tube from the vehicle.

INSTALLATION

1. NOTE:
- Install new fuel tube O-ring seals.
- Lubricate the fuel tube O-ring seals with clean engine oil prior to installation.
- When tightening the fuel tube, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the effective torque of the torque wrench being used. To correct the effective torque, a torque multiplication conversion must be used.

To install, reverse the removal procedure.