Front

HIGH-PRESSURE FUEL LINES - FRONT

REMOVAL
1. Carry out the Pressure Relief - Fuel Tube Venting procedure.






2. Disconnect the front high-pressure fuel tube from the fuel coalescer.







3. Disconnect and remove the front high-pressure fuel tube.

INSTALLATION

1. NOTE:
- Install a new fuel tube O-ring seals.
- Lubricate the fuel tube O-ring seals with clean engine oil prior to installation.
- When tightening the fuel tubes, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the effective torque of the wrench being used. To correct the effective torque, a torque multiplication conversion must be used.

To install, reverse the removal procedure.