Transmission Filler Tube

Transmission Filler Tube





Material

Removal





1. Remove the fluid level indicator.
2. With the vehicle in NEUTRAL position it on a hoist.
3. Remove the RH front wheel.





4. Remove the inner wheel liner.





5. Remove the bolt.





6. NOTE: It may be necessary to disconnect the wiring harness from the starter motor to remove the transmission fluid filler tube.

Remove the transmission fluid filler tube.

Installation





1. NOTE: Coat the O-ring at the bottom of the transmission fluid filler tube with clean automatic transmission fluid. If removed install the starter wiring harness.

Install the transmission fluid filler tube.





2. Install the transmission fluid filler tube bolt.





3. Install the inner wheel liner.
4. Install the RH front wheel.
5. Lower the vehicle.





6. Install the fluid level indicator.