Rear Aft-Axle Tank

FUEL TANK - REAR AFT-AXLE

REMOVAL
1. Remove the aft-axle fuel tank assembly.







2. Disconnect the fuel tank balance tube from the rear aft-axle fuel tank solenoid valve.







3. Remove the rear aft-axle fuel tank.
1 Remove the fuel tank support strap retaining nuts.
2 Remove the rear aft-axle fuel tank.

INSTALLATION







1. Install the rear aft-axle fuel tank.
- Install the rear aft-axle fuel tank.
- Install the fuel tank support strap retaining nuts.







2. NOTE:
- Replace the fuel tube O-ring seal.
- Lubricate the fuel tube O-ring seal with clean engine oil prior to installation.
- When tightening the fuel tube, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the effective torque of the torque wrench being used. To correct the effective torque, a torque multiplication conversion must be used.

Connect the fuel tank balance tube from the rear aft-axle fuel tank solenoid valve.

3. Carry out the Fuel System Leak Test procedure. Testing and Inspection
4. Install the aft-axle fuel tank assembly.