Crankshaft Main Bearing

Crankshaft
Main bearing journal diameter 67.482-67.504 mm (2.6568-2.6576 inch)
Main bearing journal maximum taper (straightness) 0.004 mm (0.0002 inch)
Main bearing journal maximum out-of-round between cross sections 0.0075 mm (0.0003 inch)
Main bearing journal-to-cylinder block clearance 0.048-0.024 mm (0.0019-0.0009 inch)





Crankshaft main bearing bolts (cross-mounted)
Install the vertical main bearing cap fasteners and tighten in the sequence shown.
Tighten to 40 Nm (30 ft. lbs.).
Tighten additional 90 degrees.





Crankshaft main bearing bolts (vertical)
Install the side bolts and tighten them in the sequence shown.
Tighten to 30 Nm (22 ft. lbs.).
Tighten additional 90 degrees.