Accelerator Cable
ACCELERATOR CABLEREMOVAL
All engines
1. Hold the accelerator pedal in place and disconnect the accelerator cable from the accelerator pedal and shaft.
2. Remove the accelerator cable from the bulkhead.
From inside the vehicle, compress the retaining tabs on the cable end and remove the cable from the bulkhead.
3. Remove the engine air cleaner (ACL) and outlet tube.
4. Depress the tab and remove the accelerator control splash shield.
5. Remove the accelerator cable from the throttle body cam.
4.6L engines
6. Remove the accelerator cable from the clip.
5.4L and 6.8L engines
7. Remove the accelerator cable from the clip.
All engines
8. Compress the retaining tabs on the accelerator cable and remove the cable from the bracket.
INSTALLATION
1. To install, reverse the removal procedure.