Dual Generator

GENERATOR - DUAL GENERATOR

NOTE: This procedure applies to the secondary generator of the dual generator system.

1. Disconnect the dual batteries.







2. Position the cowl wire harness aside.
1 Remove the bolt and position the manifold absolute pressure (MAP) sensor aside.
2 Remove the bolt and position the ground strap aside.
3 Remove the 2 bolts and position the power steering fluid reservoir aside.
4 Remove the 3 bolts and position the cowl wire harness aside.







3. Remove the 3 bolts, 2 nuts and the intercooler tube bracket.







4. Loosen the 2 clamps and remove the intercooler tube.







5. Rotate the accessory drive belt tensioner clockwise and remove the drive belt from the generator pulley.







6. Disconnect the generator electrical connectors.







7. Remove the bolts and the generator.

INSTALLATION
1. To install, reverse the removal procedure.