Crankshaft, Engine

Crankshaft Main Bearing Cap Bolts
Stage 1: Tighten the bolts to 25 Nm (18 ft. lbs.).
Stage 2: Tighten the bolts an additional 60 degrees

Main bearing journal diameter 57.980-58.000 mm (2.2826726-2.28346 inch)
Main bearing journal maximum taper -
Main bearing journal maximum out-of-round -
Main bearing journal-to-cylinder block clearance -
Main bearing bore inside diameter (bearing caps installed) 58.011-58.0380 mm (2.28389-2.284956 inch)
Main bearing bore inside diameter (bearing caps installed)-bearing caps graded by size 58.008-58.031 mm (2.2837749-2.284680 inch)