Test O

PINPOINT TEST O: LFC 35/DTC B1935 - PASSENGER AIR BAG CIRCUIT RESISTANCE LOW

Test O1:

Test O2-O3:

Test O4-O5:

Normal Operation
The restraints control module (RCM) monitors the resistance of the passenger air bag ignitor by measuring the resistance between pins 6 and 7. If the RCM detects low resistance between these pins, it will store a diagnostic trouble code (DTC) B1935 in memory and flash a lamp fault code (LFC) 35 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
Passenger air bag low resistance can be caused by:
- a short in the wiring harness.
- a low resistance in the passenger air bag module.
- an RCM internal concern.
- a worn or damaged shorting bar.
- a worn or damaged connector camming beam (component side).