Crankshaft Main Bearing

Crankshaft
Main bearing journal diameter 62.968-62.992 mm (2.479-2.480 inch)
Connecting rod journal diameter 49.970-49.990 mm (1.967-1.968 inch)
Crankshaft free end play 0.110-0.232 mm (0.004-0.009 inch)
Crankshaft runout to rear face of cylinder block 0.050 mm (inch) max. (0.001 inch)





Lower Cylinder block bolts and studs
Stage 1: Tighten fasteners 1-8 to 25 Nm (18 ft. lbs.).
Stage 2: Tighten fasteners 9-16 to 40 Nm (30 ft. lbs.).
Stage 3: Tighten fasteners 1-16 90 degrees.
Stage 4: Tighten fasteners 17-22 to 25 Nm (18 ft. lbs.).

Main bearings
Clearance to crankshaft-desired 0.025-0.045 mm (0.0009-0.0017 inch)
Clearance to crankshaft-allowable 0.025-0.050 mm (0.0009-0.0019 inch)
Bearing wall thickness-grade 1 2.497 mm (0.0983 inch)
Bearing wall thickness-grade 2 2.501 mm (0.0985 inch)
Bearing wall thickness-grade 3 2.505 mm (0.0986 inch