Main Control Cover and Gasket

Removal
1. Remove the battery tray.





2. Disconnect the wiring harness from the battery tray bracket.





3. Remove the battery tray bracket.





4. Remove the breather tube and disconnect the mass air flow (MAF) sensor electrical connector.





5. Remove the intake tube and the air cleaner cover.





6. Remove the vent tube hose.
7. With the vehicle in NEUTRAL, position it on a hoist.
8. Remove the LH front wheel.





9. Remove the LH splash shield.





10. Remove the main control cover bolts and the cover.





11. Remove the main control cover gasket from the pan.

Installation





1. Position the main control cover gasket on the case.





2. Position the main control cover on the case and loosely install the bolts.





3. Tighten the bolts in the sequence as indicated.





4. Install the LH splash shield.
5. Install the LH front wheel.





6. Install the vent tube hose.





7. Install the intake tube and the air cleaner cover.





8. Install the breather tube and connect the mass air flow (MAF) sensor electrical connector.





9. Install the battery tray bracket.





10. Connect the wiring harness to the battery tray bracket.
11. Install the battery tray.