Brake Caliper Support Bracket
Brake Caliper Support BracketRemoval and Installation
1. Remove the rear disc brake caliper anchor plate.
2. Remove the hub and rotor.
3. Remove the rear brake shoes and linings.
4. Remove the adapter nuts.
5. Slide the adapter far enough to disconnect the parking brake rear cable and conduit. Remove the rear wheel disc brake adapter and rotor shield assembly.
6. Remove the bolts and the rear wheel disc brake shield.
7. To install, reverse the removal procedure.
- For Ford axle, F-250 and F-350, tighten to specification.
- For Dana axle, F-350, F-450, F-550, tighten to specification.