150000 MI or 240000 KM

Lubricate
    Wheel Bearing
      Lubricate 4x2 wheel bearings or 4x4 hub needle bearings (under trailer towing or off-road conditions, as required). Install new wheel bearing grease seals (under commercial use, as required)
Inspect
    Wheels
      Inspect wheels for end play and noise.
    Steering and Suspension
      Inspect steering linkage, suspension and, if equipped, driveshaft and ball joints. If equipped, inspect and lubricate 4x2 ball joints and steering idler arms.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect cooling system and hoses.
    Brakes and Traction Control
      Inspect brake pads,shoes, brake discs, drums, brake lines and hoses.
    Ball Joint
      Inspect and lubricate 4x2 ball joints.
    Air Filter Element
      Check the air filter minder and reset after a new filter is installed.
Replace
    Oil Filter, Engine
      Replace oil filter only if NOT using Special Operating Conditions T, I or D.
    Fuel Filter
      Install new frame-mounted and engine fuel filters.
    Fluid Filter - A/T
      If equipped, change the external transmission fluid filter and in-line service installed transmission fuild filter.
    Fluid - Differential
      Replace differential fluid (front and/or rear where applicable)
    Fluid - A/T
    Engine Oil
      Replace oil only if NOT using Special Operating Conditions T, I or D.
    Cabin Air Filter / Purifier
      If equipped, install a new cabin air filter.
Rotate
    Tires
      Inspect tires for wear.