Fuel Tank Pressure Sensor: Service and Repair
FUEL TANK PRESSURE SENSORREMOVAL
1. Remove the fuel tank.
2. CAUTION: The fuel tank pressure sensor must be disengaged from the fuel tank before it can be removed. Push down while rotating the sensor counterclockwise to disengage it from the fuel tank. Failure to do so can cause damage to the fuel tank pressure sensor or the fuel tank.
Remove the fuel tank pressure sensor.
- Disconnect the electrical connector.
- Press down and rotate the fuel tank pressure sensor counterclockwise and remove it from the fuel tank.
INSTALLATION
1. To install, reverse the removal procedure.
- Carry out the system leak test. Evaporative Emission System Leak Test
- Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle