Connecting Rod, Engine

Connecting rod-to-pin clearance 0.009-0.023 mm (0.0004-0.0093 inch)
Connecting rod pin bore diameter 22.024-22.012 mm (0.8671-0.8666 inch)
Connecting rod length (centerline bore-to-bore) 169.1 mm (6.6575 inch)
Connecting rod maximum allowed bend 0.762 mm 0.03 inch)
Connecting rod maximum allowed twist 1.27 mm 0.04 inch)
Connecting rod side clearance 0.475-0.125 mm (0.0187-0.0049 inch)





Connecting Rod
Install the new bolts loosely.
Tighten the bolts in two stages, using the sequence shown.
^ Stage 1: Tighten to 43 Nm (32 ft. lbs.).
^ Stage 2: Tighten an additional 105°.