Front

Disc-F-250, F-350 4x4

Material:

Material

Removal
1. Remove the disc brake caliper anchor plate.





2. NOTE: Perform this step for F-250 and F-350 4x4 SRW vehicles.

Remove the rotor.





3. NOTE: Perform this step for DRW vehicles.

NOTE: If excessive force must be used during brake rotor removal, the brake rotors should be checked for lateral runout prior to installation.

Remove the eight hub extender nuts, the hub plate and the rotor.
1 Remove the eight hub plate nuts.
2 Remove the hub plate.
3 Remove the rotor.

Installation





1. Position the front disc brake rotor to the wheel hub. Make sure the wheel hub and the front disc brake rotor braking and mounting surfaces are clean.
- Use brake parts cleaner to clean the front disc brake rotor.





2. NOTE: Perform this step for DRW vehicles only.

Install the front wheel hub extender and nuts.
3. Install the front disc brake caliper anchor plate.