Hublock

Hublock

Material:

Removal and Installation

1. Remove the hublock.
a. Remove the retainer ring.
NOTICE: To prevent damaging the hublock, do not use tools other than hands or "grips" gloves to remove the hublock.
b. Pull outward and remove the hublock.






2. To install, reverse the removal procedure.
- Clean the O-ring seal contact area as necessary to provide a good O-ring seal. Install a new hublock O-ring seal kit. Apply a coat of grease to the O-ring seal and contact area.
- Push the hublock in firmly by hand to seat the O-ring seal and contact area.
- Be sure the retainer ring is completely expanded into the wheel hub groove.