4 Wheel Antilock Control

Anti-Lock Brake System (ABS) Module-Stability Assist
Removal and Installation

CAUTION: Do not replace stability assist modules installed on vehicles built before February 2003 with those manufactured after February 2003.

NOTE: When installing a new module, it must be calibrated and reconfigured (either by download/upload or uploading the as-built database method).

1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage can result.

Disconnect the battery ground cable.





2. Disconnect the anti-lock brake control module electrical connector.





3. Remove the screws and the anti-lock brake control module.
4. To install, reverse the removal procedure.