Auto-Lock Enable/Disable - Using the Ignition Switch

AUTO-LOCK ENABLE/DISABLE - USING THE IGNITION SWITCH

Another way to turn the auto-lock feature off/on is by following this series of steps:
1. Close all doors.
2. Confirm that the key is in the OFF position.
3. Turn the key from OFF to ON.

4. NOTE: Steps 4 through 8 must be carried out within 30 seconds.

Press UNLOCK three times.

5. Turn the key from ON to OFF.
6. Press UNLOCK three times.
7. Turn the key from OFF to ON.
8. Verify that the horn chirps. This indicates the enable/disable mode and now is ready to accept program changes.
9. Press UNLOCK once to command the vehicle security module to toggle the auto-lock/relock feature OFF.
10. Press LOCK once to enter the command.
11. Verify that the horn chirps one time. There should only be one chirp indicating that the auto-lock/relock feature has been disabled. If one chirp is heard followed by a longer sound of the horn, the auto-lock/relock feature has just been enabled. Return to Step 10.
12. Turn the key to the OFF position to exit the enable/disable mode.
13. Exit the vehicle and verify that the horn chirps once to indicate that a feature has been changed and that auto-lock/relock has been disabled.