4R100 Automatic Transmission

Digital Transmission Range (TR) Sensor





Special Tool(s)

Removal
1. Position the vehicle on a hoist. Place in NEUTRAL.





2. Disconnect the connector.





3. Disconnect the shift cable at the manual control lever.





4. Remove the digital Transmission Range (TR) sensor.
1 Remove the bolts.
2 Remove the digital Transmission Range (TR) sensor.

Installation





1. Install the digital TR sensor.
1 Install digital TR sensor.
2 Loosely install the bolts.





2. NOTE: Make sure that the manual control lever is in the NEUTRAL position.

Using the special tool, align the digital TR sensor.





3. Tighten the bolts.





4. Reconnect the shift cable at the manual control lever.





5. Reconnect the connector.
6. Lower the vehicle.